Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise.
Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members.
The Regional Safety Engineer provides hands-on safety and environmental support to Archer’s Huntington Beach composites manufacturing site and Hawthorne Airport flight operations. This role owns day-to-day implementation of Archer’s Safety and Environmental Services programs in the region, with a focus on high-hazard equipment (autoclaves, pressure vessels, ovens, CNC machining, dust collection, compressors, chillers) and aircraft/ground operations. The engineer partners closely with site leadership, maintenance, facilities, and flight ops to drive risk down while enabling schedule.
Key Responsibilities
- Act as primary safety engineer for Huntington Beach and Hawthorne, serving as the first point of contact for supervisors and technicians on EHS questions and issues.
- Lead pre-startup safety reviews (PSSRs) and buy-offs for regional equipment and processes, including autoclaves, ovens, pressure vessels and air receivers, CNC/gantry systems, dust collection, compressed air/vacuum systems, and refrigeration/chiller systems.
- Own regional compliance for Cal/OSHA pressure vessel/air receiver requirements (registration, inspections, relief devices, nameplate verification) in coordination with Facilities and third-party inspectors.
- Support electrical and machine-safety risk assessments for 480 V, high-amp equipment (autoclaves, ovens, chillers, compressors, CNC) including arc-flash label implementation, LOTO procedures, guarding, and safe-work practices.
- Develop and maintain documented operating envelopes and safety limits for thermal processes (autoclave cures, oven cycles, reefer operations), aligned with OEM ratings and Archer’s manufacturing requirements.
- Evaluate combustible dust and airborne composite hazards (machining/trim cells, sanding, dust collectors); drive controls such as source capture, collector design/protection, housekeeping standards, and respiratory protection where needed.
- Oversee safe management of compressed air and vacuum systems, including guarding of rotating components, piping/hosing integrity, condensate/oil handling, and prevention of trip, struck-by, or stored-energy hazards.
- Coordinate hazardous materials and waste controls related to site equipment (refrigerants such as R-134a, process oils, resins, water-treatment media), including labeling, storage, spill response, and proper waste classification and disposal.
- Provide direct safety support to Hawthorne flight operations: ramp safety, aircraft ground handling, walk-around/maintenance hazards, tug and GSE use, fueling interfaces, and coordination with airport rules and procedures.
- Conduct routine inspections and structured hazard walks at both locations, generate clear corrective actions, and track closure with accountable owners.
- Support incident investigations, near-miss reviews, and root-cause analysis for the region; ensure findings translate into practical engineering or procedural controls.
- Deliver targeted safety training and toolbox talks for local teams (LOTO, machine safety, pressure systems, flight-line safety, contractor controls), coordinating with the central safety training function.
- Partner with Facilities and Projects on change management (MOC) for new equipment, relocations, and process changes; ensure regulatory triggers (Cal/OSHA, fire code, air district, building permits) are identified and addressed early.
- Maintain site-level EHS documentation: procedures, checklists, inspection records, equipment safety files, and PSSR/buy-off packages for assigned assets.
- Support contractor and vendor management in the region, including pre-job risk review, orientation expectations, and safe work verification around high-hazard systems.
Required Qualifications
- Bachelor’s degree in Safety, Industrial/Mechanical/Manufacturing Engineering, Environmental Health & Safety, or related technical field; equivalent experience considered.
- 5+ years of EHS or safety engineering experience in aerospace, aviation maintenance, advanced composites, or heavy manufacturing, with direct exposure to high-hazard equipment (pressure vessels, ovens, CNC/machining, or similar).
- Demonstrated experience supporting flight operations, aircraft maintenance, or airport/ramp environments (Part 91/135/121 or experimental flight test), including familiarity with flight-line hazards and controls.
- Strong working knowledge of OSHA/Cal-OSHA requirements and relevant codes/standards for: machine guarding, LOTO, electrical safety, pressure vessels/boilers, walking-working surfaces, and respiratory protection.
- Hands-on experience conducting formal hazard/risk assessments and PSSRs, writing practical procedures, and implementing engineered and administrative controls in active operations.
- Proven ability to collaborate on the floor with technicians, maintenance, and operations leaders, and to influence without formal authority across functions and locations.
- Willingness and ability to travel regularly between Huntington Beach, Hawthorne, and other regional sites (target 25–40%).
Preferred Qualifications
- Experience with composites manufacturing processes (prepreg layup, bonding, cure, trim) and associated chemical and dust hazards.
- Direct experience with autoclave and large industrial oven safety, including OEM interfaces, over-temperature/over-pressure protection, and validation/qualification activities.
- Prior work with combustible dust systems and dust collectors in aerospace or industrial settings.
- Familiarity with airport operations manuals, ground handling standards, and coordination with airport authorities or FBOs.
- Professional certification such as CSP, CIH, CHMM, or equivalent, or clear progress toward one.
At Archer, we aim to attract, retain, and motivate talent with the skills and leadership needed to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s strategy. For this position, we are targeting a base pay range of $117,800 - $155,000. Actual compensation offered will be determined by job-related knowledge, skills, and experience.
Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at [email protected]. Reasonable accommodations will be determined on a case-by-case basis.
Information collected and processed as part of any job applications you choose to submit is subject to Archer's Candidate Privacy Policy.
Archer is unable to provide work visa sponsorship for this position at the present time.
Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.
Archer Aviation does not engage with external recruiting agencies/individual recruiters with whom it does not have a prior written agreement. Archer reserves the right to make use of any unsolicited resumes that it receives and bears no responsibility for payment of any fees asserted from the use of unsolicited resumes. If you are a recruiting agency or individual recruiter wishing to do business with Archer, please reach out to [email protected]. All employment processes are managed by the Archer People Team.